Environmental scanning electron microscopy of hydrated conditioned/etched dentine
De Wet, F.A.; van der Vyver, P.J.; Eick, J.D.; Dusevich, V.M.
Sadj Journal of the South African Dental Association 55(11): 603-609
2000
ISSN/ISBN: 1029-4864 PMID: 12608223 Document Number: 519027
Various etchants/conditioners are used during dental treatment to affect or remove the smear layer. The purpose of this study was to evaluate the effect of different treatments on moist dentine, using a field emission environmental scanning electron microscope (FE-ESEM). Twenty freshly extracted, human molar teeth were utilised. The roots and pulps were removed, and the crowns horizontally sectioned with a low speed diamond saw (Isomet) (with cooling in a saline solution) in order to expose superficial dentine. A smear layer was created on these surfaces by using 600 grit silicone carbide paper. Test surfaces were then treated in one of the following ways: 1. 37% phosphoric acid liquid 2. 37% phosphoric acid gel 3. NRC (non-rinse conditioner) without rinsing 4. NRC with rinsing. Shallow grooves were cut on the untreated sides, using a thin diamond bur. This enabled the samples to be split in half when pressure was applied in the grooves. Samples were maintained moist throughout specimen preparation. Samples were examined in the FE-ESEM (Philips XL 30) in such a way that the effect of the treatment could be viewed occlusally, as well as perpendicular to the treated interface. Phosphoric acid liquid and gel removed the smear layer, and demineralised the dentine for approximately 5-10 micrometers. NRC penetrated the smear layer and modified it to a lesser degree. However, washing of the NRC treated surface removed part of the smear layer, and opened up some dentinal tubules. Excellent resolution was possible with the FE-ESEM in both the wet and dry modes.