Experimental investigation of ceramic materials for bonded metal ceramic systems
Schäfer, A.
Zwr 99(7): 558-560
1990
ISSN/ISBN: 0044-166X PMID: 2220123 Document Number: 351394
Opaque porcelain materials used for the bonding layer in metal-ceramic restorations were analysed. The type of bond failure, produced by a bond/shear test was determined and the differences between metal/ceramic systems with conventional opaquers and metal/ceramic systems with special bonding agents are discussed.
Document emailed within 1 workday
Related Documents
Weber, H. 1982: Metal ceramic boundary surfaces in the Ni-Cr-ceramic system from a recent viewpoint Deutsche Zahnarztliche Zeitschrift 37(11): 896-899Chu, S.J. 2001: Use of a synthetic low-fusing quartz glass-ceramic material for the fabrication of metal-ceramic restorations Practical Procedures and Aesthetic Dentistry: Ppad 13(5): 375-380; Quiz 381
Donovan, T.E.; Cho, G.C. 1998: Soft tissue management with metal-ceramic and all-ceramic restorations Journal of the California Dental Association 26(2): 107-112
Wen, Z.; Du, C.; Du, L. 1998: Factors analysis on ceramic crack of metal-ceramic restorations Hua Xi Kou Qiang Yi Xue Za Zhi 16(1): 62-64
Ribeiro, J.G.R.; Segalla, J.C.M.; Perez, F.; Ribeiro, J.C.R.; Moyses, M.R. 2012: Effect of ceramic surface treatment on the shear bond strength of a resin cement to different ceramic systems General Dentistry 60(5): E315-E320
Marx, H. 1986: Metal-ceramic bond strength testing--special materials science problems Zwr 95(5): 524-527
Petridis, H.; Garefis, P.; Hirayama, H.; Kafantaris, N.M.; Koidis, P.T. 2003: Bonding indirect resin composites to metal: Part 1. Comparison of shear bond strengths between different metal-resin bonding systems and a metal-ceramic system International Journal of Prosthodontics 16(6): 635-639
Wen, N.; Liu, H.-C. 2009: Clinical application of ceramic restorations VII. Classification and application of ceramic materials Zhonghua Kou Qiang Yi Xue Za Zhi 44(3): 177-179
McLaren, E.A.; Terry, D.A. 2002: CAD/CAM systems, materials, and clinical guidelines for all-ceramic crowns and fixed partial dentures Compendium of Continuing Education in Dentistry 23(7): 637
Fazi, G.; Vichi, A.; Corciolani, G.; Ferrari, M. 2009: Spectrophotometric evaluation of color match to VITA classical shade guide of four different veneering porcelain systems for metal ceramic restorations American Journal of Dentistry 22(1): 19-22
Semlitsch, M.; Willert, H.G. 1996: Clinical Wear Behaviour of UHMW Polyethylene Cups Paired with Metal and Ceramic Ball Heads in Comparison to Metal-on-Metal Pairings of Hip Joint Replacements Acta Chirurgiae Orthopaedicae et Traumatologiae Cechoslovaca 63(2): 68-82
Von Andrian-Werburg, H.F.; Griss, P.; Krempien, B.; Heimke, G. 1973: Clinical problems and experimental morphologic results using ceramic materials in orthopedics and traumatology Zeitschrift für Orthopadie und ihre Grenzgebiete 111(4): 577-579
Lehner, C.R.; Männchen, R.; Schärer, P. 1995: Variable reduced metal support for collarless metal ceramic crowns: a new model for strength evaluation International Journal of Prosthodontics 8(4): 337-345
Wang, D.L. 1991: Experimental study of biological glass ceramic and bone morphogenic protein-biological glass ceramic implantation Zhonghua Kou Qiang Yi Xue Za Zhi 26(6): 370-372
Evangelista, P.J.; Kamath, A.F.; Aversano, F.J.; Silvestre, J.; Lee, G-Chin.; Nelson, C.L. 2015: Ceramic-Ceramic Hip Arthroplasty for Osteonecrosis: Average 5-year Follow-up in Patients Less Than 50 Years of Age Bulletin of the Hospital for Joint Disease 73(1): 42-45
Nizard, R.S.; Sedel, L.; Christel, P.; Meunier, A.; Soudry, M.; Witvoet, J. 1992: Ten-year survivorship of cemented ceramic-ceramic total hip prosthesis Clinical Orthopaedics and Related Research 282: 53-63
Anusavice, K.J. 1997: Reducing the failure potential of ceramic-based restorations. Part 2: Ceramic inlays, crowns, veneers, and bridges General Dentistry 45(1): 30-35
Takigami, I.; Ito, Y.; Miyagawa, T.; Akiyama, H. 2018: Magnetic Resonance Imaging Findings Following Ceramic-on-Ceramic Total Hip Arthroplasty Using Modular Neck Femoral Components Bulletin of the Hospital for Joint Disease 76(3): 171-175
Aida, M.; Tabei, N.; Kimoto, S.; Tanimura, H.; Takahashi, H.; Yaguchi, T.; Nishiyama, N. 2012: Ceramic bond durability and degradation mechanism of commercial gamma-methacryloxypropyl trimethoxysilane-based ceramic primers American Journal of Dentistry 25(4): 231-234
Ries, S.; Wolz, J.; Richter, E.-J.ür. 2006: Effect of design of all-ceramic resin-bonded fixed partial dentures on clinical survival rate International Journal of Periodontics and Restorative Dentistry 26(2): 143-149