Bonding strength of metal frameworks and adhesive agents in the resin-bonded bridge technic. 3. Comparative research on various retention mechanisms and adhesive systems
Wirz, J.; Besimo, C.; Schmidli, F.
Schweizer Monatsschrift für Zahnmedizin 99(1): 24-39
1989
ISSN/ISBN: 0256-2855 PMID: 2643823 Document Number: 338896
In fixed denture prosthetics, macro- and micromechanical as well as chemical adhesive mechanisms may be used between metal and bonding agent. The in vitro research presented here determines the adhesive strength of six different bonding agents and five different retention mechanisms on twelve precious and nonprecious metal alloys using shearing stress. The evaluation of the results should help to assess the suitability of the various combinations of materials and anchoring methods for the fixation of adhesive bridges. On the basis of the adhesive strengths and the examination of the various clinical advantages and disadvantages of the different methods that were analyzed, the electrolytic etching of nonprecious metal alloys appears to be particularly suitable for fixed denture prostheses. An efficient combination between alloy and bonding agent is of particular importance in this area. Macromechanical mesh and negative retentions can only be used to a limited clinical extent due to their high space requirements. Very good results were produced by the preconditioning of inner anchor surfaces with silanes. Sandblasting, however, provided unsatisfactory shear-stress results over a broad front independently of the type of alloy.